Where to buy pea gravel by the ton near me? (2024)

How big is 1 ton of pea gravel?

Each ton covers approximately 60 square feet at 4" deep, 80 square feet at 3" deep, or 120 square feet at 2" deep. Pea Gravel does not compact so you do not need to account for a compaction ratio.

How much does 1 ton of gravel cover?

A ton of gravel will cover approximately 100 square feet, 2 inches deep.

How much pea gravel do I need for a 10x10 patio?

How many tons of pea gravel do I need?

To manually calculate how much gravel you need, measure the length, width, and desired depth of the area in feet, then multiply those numbers to determine cubic feet. Next, divide your cubic feet value by 27 to determine cubic yards. Finally, to convert cubic yards to tons, multiply by 1.4.

How much pea gravel is in a dump truck?

A dump truck can typically hold between 12-20 tons of gravel, depending on the size of the truck. It is also important to factor in the weight of the material when calculating how much gravel a dump truck can carry. For example, 8-10 yards of gravel equates to around 0.66 tons.

How deep should pea gravel be?

How deep should pea gravel layers be? — Typically, each layer of gravel should be between 2 and 2.5 inches.

How many square feet will 2 tons of pea gravel cover?

Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.

What do you put under pea gravel?

What Do You Put Under Pea Gravel? Landscaping fabric and sand or crushed rock (or both) are the most common. You can also use a honeycomb grid for extra stability.

How do you get pea gravel to stay in place?

The two most effective methods for stabilizing pea gravel are cement and permeable pavers. If you're stabilizing pea gravel with cement, it will hold for a while until it's eventually damaged by traffic and water exposure.

How many bags of pea gravel equal a yard?

There are 54 50lb bags of stone or sand per cubic yard. 27 cubic feet equal 1 cubic yard (3'L x 3'W x 3'H).

How many wheelbarrows in a ton of pea gravel?

For most materials, you would need around 20-25 wheelbarrows to make up one ton of gravel.

How many square feet will 1 yard of pea gravel cover?

We know that 1 cubic yard of pea gravel covers about 324 square feet at a depth of 1 inch. Divide that 324 by your desired depth of gravel in inches to figure out how many square feet you can cover with 1 cubic yard of pea gravel for your project.

Will 1 ton of gravel fit in a pickup?

Full-size Pickup Trucks: Can usually handle 2 cubic yards of soil, 2-3 cubic yards of mulch, and 1 cubic yard of stone or gravel.

How much gravel do I need for a 10x12 shed?

A bed of 4" or more of crushed/screened 3/4 minus gravel or other porous gravel is required for all sheds over 8' wide. Gravel base is to be 2 feet larger than the shed size. Example: 10x12 shed requires 12x14 base (see diagram below).

How much will 10 yards of gravel cover?

A yard of any material will cover approximately 100 square feet at 3 inches of depth.

What is the cheapest rock for landscaping?

Pea gravel is the cheapest landscaping rock available. It can be used for a wide variety of landscaping projects, including driveways.

How many yards is 1 ton of pea gravel?

But first, we have to convert tons into yards to figure out how much gravel, or how many tons, we actually need. The way we change tons of gravel into yards in the building industry is by multiplying tons by 0.714. For example, 1 ton of gravel = 0.714 yards of gravel.

Can you walk barefoot on pea gravel?

Pea gravel is a popular material because it is inexpensive and comes in a variety of colors and sizes. It's composed of rounded pebbles, so it is comfortable for pets or bare feet to walk across.

Should I put plastic under pea gravel?

A good landscape fabric beneath a layer of pebbles or gravel goes a long way in preventing weed seed germination. Even the best landscape fabric won't stop 100% of the weeds. Some seeds will inevitably germinate and sprout, however having a weed block barrier will keep the roots from getting a foothold in the soil.

Why not to use pea gravel?

Pea gravel that is directly on topsoil can lead to weed growth, tripping hazards, and an unsightly garden.

What are the disadvantages of pea gravel?

A pea gravel patio is inexpensive, easy to install, and simple to maintain! With that said, there are a few drawbacks, including the propensity for the rocks to scatter, the possibility of weeds (if you don't install it properly), and concerns with furniture sinking.

How do you spread pea gravel?

How do you install pea gravel? Compared to other hardscaping materials, installing pea gravel is relatively easy. Generally, you work the soil about 6 inches deep, remove any weeds, lay down 2 inches of coarsely textured base rock (also called crushed rock), and cover that with a 3-inch-deep layer of pea gravel.

What size is pea gravel available in?

This attractive gravel is a quartz aggregate in a semi rounded shape, ranging from 6-25mm. It's best laid 4-5cm deep. Pea Gravel is also available in 10-14mm.

How much does 1 2 yard pea gravel weigh?

Can you put pea gravel on top of dirt?

Don't Place Pea Gravel Right on Soil

If you are using the pea gravel as an alternative to mulch or to create a pathway in your yard, it should never be put directly on top of soil. Before adding pea gravel to your landscape, apply a layer of landscaping fabric to the soil.