How to know how many tons my ac unit is? (2023)

How to know how many tons my ac unit is?

Simply divide the BTUs by 12,000 to calculate the tonnage of your unit. For example, if your air conditioner is 36,000 BTUs, you have a 3-ton unit. Some manufacturers bury tonnage or BTU information in their model numbers. Look for an even, two-digit number between 18 and 60.

How many sq ft will a 4 ton AC unit cool?

A four-ton unit is suitable for homes that are more than 2,100 square feet up to 2,400 SF.

How do you read an AC unit label?

The numbers you'll see on residential air conditioners and heat pumps are: The 3 digits in the model number tell you the nominal capacity in thousands of BTU/hr. Since each 12,000 BTU/hr is equivalent to 1 ton of air conditioner capacity, it's easy to figure out how many tons of nominal capacity your AC has.

How many tons is a typical residential AC unit?

One ton of cooling capacity is equal to 12,000 BTUh. Residential air conditioners usually range from 1.5 to 5 tons (or, 18,000 – 60,000 BTUh). Anything with larger cooling capacity would be considered light commercial.

What indicates ton in AC?

The BTU for air conditioners ranges from 5000 to 24000 BTUs and 12000 BTUs is equal to 1 ton.

How many square feet is a 3.5 ton AC unit?

3.5 tons: 1801-2100 sq. ft.

How many sq ft will a 5 ton AC unit cool?

How many sq ft will a 3-ton AC cool?

Is a 3-ton air conditioner enough for my house? Apart from the capacity of the air conditioner, you also need to account for things like your climate, house size, and existing insulation. In general, a 3-ton air conditioner will work well in an area of around 1,200 square feet.

What happens if your AC unit is too big for your house?

Air conditioners that are too big consume more energy, endure more wear and tear, and simply don't work as well or as long as an appropriately sized unit. This can cause higher utility bills, more repairs, and discomfort in your home.

How many tons of AC do I need for a 2000 square-foot house?

The typical 2,000-square-foot home will need a central AC unit that is around 3 tons or 36,000 BTU. The larger an AC system is, the more it will cost.

How many tons of AC do I need for 1800 sq ft house?

Here's some math: You need around 20 BTUs per square foot, which is equivalent to 0.0016 tons. For example, a 600-square-foot space requires a 12,000 BTU or 1-ton unit. By those calculations, an average 1,800-square-foot house would need a 3-ton central air conditioning unit.

What size is a 2 ton AC in a house?

How do I know what SEER my AC unit is?

An A/C's SEER rating is also listed near the top of the unit's manufacturer label, where the model and serial number are listed. Look for the beginning digits of the model number. For example, a model number that begins with 15AC means the air conditioner has a SEER rating of 15.

How do I read my carrier AC model number?

Look on the back of your unit, and you'll find the model number listed on a silver series rating-plate located above the service valve connections. If your heat pump is geothermal, the model information should be easily found on the front of the unit.

What is a 3 ton AC unit?

A 3-ton air conditioner moves 36,000 BTUs of heat per hour — enough to cool a home of up to 1,800 square feet in the southernmost states. In the Northeast and upper Midwest, these units are recommended for homes between 1,651 and 2,100 square feet in size.